Monochrome 128×32 I2C OLED Graphic Display Supplier

Monochrome 128×32 I2C OLED Graphic Display Modules are popular OLED parts in many communities, like Adafruit and Waveshare.

As an OLED manufacturer, Go2Display supplies wholesale OLED display modules at factory prices.

If you have a special requirement, a custom OLED module solution is also available.


Free Sample available all time!

  • Accept Custom Display Solution
  • Offer 12 Months Warranty
  • ISO 9001:2001 and RoHS Compliant for All Products


This 128×32 OLED Graphic Display is a monochrome OLED Module with a 0.91 inch PMOLED panel / 128×32 resolution Screen / I2C Interface /SSD1306 Microchip IC / COG with PCB design.

The high quality, low price product is always our long-term goal.


Technical Details

Download Product References Below
Product Datasheet: GFOP0.91-12832NT
Control IC Datasheet: SSD1306


Model / Series Name GFOP0.91-12832NT
Screen Size (Inches) 0.91”
Display Mode PMOLED (Passive Matrix) Graphic
Resolution 128 x 32 pixels
Display Color White, Blue Optional
Module Size WxHxD (mm) 12.00 x 38.00 x 2.40
Active Area WxH (mm) 22.384 x 5.584
Driver IC SSD1306
Drive Duty 1/32 Duty
Interface Type I2C Interfaces
Operating Voltage 3.3V/5V
Operating Temperature -30 ~ +70ºC
Storage Temperature -40 ~ +80ºC


Monochrome 0.91” OLED Graphic Display Module Datasheet

Monochrome 128x32 I2C OLED Graphic Display Supplier datasheet


More Details

This OLED display module has the similar screen size of the 0.96” one. But it has a lower resolution of 128 x 32 pixels, while the 0.96” has 128 x 64.

It emits its own light without a backlight. Therefore, it uses less power and is thinner than the LCD. And that is why it has such a high contrast ratio. Its high contrast makes them easy to read.

Driver IC SSD1306 provides an I2C interface. The connector only needs 3 pins to talk with the built-in chip.

The easy-to-use I2C interface so you can drive it easily in an Arduino project.

Remember that OLED displays have thousands of OLEDs. Each pixel is a little organic LED. It will start to dim if it stays on for more than 1000 hours.

If you want the display always to be the same brightness, please turn off the display (set the pixels off) when you don’t need it.

The power consumption depends on how many pixels are on. On average, it uses about 20mA on the 3.3V supply.

The OLED driver has a simple switch-cap charge pump that turns 3.3v-5v into a high-voltage drive for the OLEDs. This is one of the easiest ways to add an OLED to your project.

Custom OLED Display Service

All our displays come with a 12-month warranty. ISO 9001:2001 and RoHS compliance ensures high-quality components and support.

If you need a more special OLED display module for your project or product. Call us today for a custom OLED display solution.

Additional information




Parallel, MCU, SPI, RGB

Touch Screen